Installing Brushed Nickel Bathroom Mirror

Author: calvin | Categories: Bathroom Mirror comments
Oval Brushed Nickel Bathroom Mirror

Brushed nickel bathroom mirror – When it comes to building and rebuilding, some projects tend to get the most attention. Both the kitchen and the bathroom are on this short list. While remodeling a kitchen can be expensive and time consuming, many bathroom projects are simple and very cheap. Installing a bathroom mirror with cabinet, for example, can be done in just a few hours with very basic tools. The easiest way to install a bathroom cabinet mirror is to use a surface mounted installation.


Remove the mirror doors to the bathroom cabinet. This is usually accomplished by unscrewing the hinges. Put away the doors. Determine the location of the brushed nickel bathroom mirror with cabinet. With the help of a friend, the bathroom cabinet holds the wall. Center the cabinet over the sink about 40 inches from the floor. Place the level on the shelf to make sure it is level. Trace around the outside of the bathroom cabinet with a pencil. Set the cabinet aside.

Locate the sliders in the tracked area with a slider detector; mark with a pen. If you cannot find suitable studs in the immediate area, you must use hollow wall anchors installed according to the instructions of the package. Measure the position of the studs in relation to the traced contours of the cabinet. Transfers these marks to the brushed nickel bathroom mirror with cabinet, determine the best location for your screws. The top screws should penetrate the reinforcement strip on the back of the cabinet door.

Comments are closed.